|
Actual Video of STSC-101 Coming Soon. The Trimmer Head shown along with the performance & results are identical on both units.
-
Mower Assembly includes a 'Self-Contained Hyd. System' to power the Mower Head & includes the following:
-
PTO Pump & 540RPM PTO Shaft.
-
9 Gallon Hydraulic Reservoir.
-
Hyd. Hoses & Fittings:
-
Direct Drive Hydraulic Motor for Mower Head.
-
Integrated Pressure Relief Valve for Drive System Protection.
-
Rotary Mower Head has 2 Solid Steel Swinging Blades to Provide the Best Possible Cut!
-
Sharpenable Blades are 5/16" thick x 3-1/8" wide x 8-3/4" long.
-
Outside edge/max reach of the Mower Head from Hitch Frame Center-Line, Fully Retracted is 70".
-
Rotary Head Telescopes out 24" & can be Extended or Retracted 'On-The-Fly'.
-
Dimension from Frames Center Line to 'Furthest Edge of (Green) Frame' is 38".
-
'Furthest Edge of (Green) Frame' is the Receiver for the Telescoping Tube.
-
Telescoping Feature Requires 1 Set of Tractor Hydraulic Outlets.
-
Horizontal Mower Head Swing Return Managed by an Adjustable Double Spring System:
-
Swing Tension Can Be Mild for Fragile Stems, Trunks & Posts, or Rigid for Faster Ground Speed, and Also for Steep, Uphill Travel!
-
Powder Coated Paint!
-
Sample Photos show Mower on a Tractor for reference only - Tractor is Not included.
-
Mower Package Includes 540RPM PTO Shaft!
-
Suitable for Tractors with Cat 1, 3-Point Hitches.
-
Adaptable to Cat 2 Hitches.
-
Minimum Cutting Height: 1-1/2" to 2".
-
Overall Diameter of Cutting Head: 36".
-
Overall Cutting Width: 31".
-
Foam/Rubber Bumper is 1-1/2" Dia.
-
Metal Channel that Rubber Bumper is secured in is 3/4".
-
With the Rubber Bumper & Metal Channel, about 2-1/2" will not be cut.
-
Overall Vertical Dimension (bottom of Blade Carrier to Top of Hyd Motor) of Mower Head is 11":
-
Dimension from bottom of Pan Carrier to top of Cutter Deck is 4".<
-
Mower Head Speed is 2400RPM's.
-
Rotor & Blades Rated to Cut 2" Diameter Material.
-
Weight: 575lb's w/Reservoir Full (Less PTO Shaft, Pallet/Crating, etc.).
-
Specifications are based on manufacturer provided data & subject to change.
|
|
|